Here are the steps to do the same: 1. Locate the Power button on your PS4. It is denoted by the PlayStation logo. 2. Press the button for some time. 3. Wait for your PS4 to turn off, then unplug the cable. It is possible to reset your PS4 without a controller, which may come in handy in many situations. To pair again with the PS4 you have to connect the controller to the PS4 using the USB cable. If the pairing with the USB cable is not working you can reset the controller by pressing the button inside the hole on the back of the controller. If you still want to remove the pairing on the computer (not needed after pairing back with PS4), you A) Plugging the controller into the USB port of the PS4 doesn't charge it. This could be a bad cable or a bad USB port. Try to isolate the problem by changing cables or pluging something else into the USB port like a cell phone. If it still doesn't work with the new cable and won't charge your cell phone then the problem is the USB port on the Press the (PS) button on the controller. When the devices are connected, both the wireless adaptor’s status indicator and the controller’s light bar turn a solid colour. Hints If the controller cannot connect to the wireless adaptor, try the following: ˎ Turn the controller off and try to pair it again with the wireless adaptor (the adaptor Step 2: Create a new folder on your USB device and name it PS4. Inside that folder, create a folder and name it “UPDATE” in all caps. Put the firmware file into that “UPDATE” folder so you Currently having this problem. I've tried everything short of a full wipe of my Playstation. My controllers only work in the factory mode where you install new software and updates. One problem I'm having is my ps4 won't connect to internet network. I think that may have something to do with it. Push the button on the inside for a couple of seconds and then release. Connect your DualShock 4 controller to a USB cable that is connected to your PlayStation 4. Press and hold the PlayStation Step 1: Turn off the PlayStation 4. Step 2: Locate the small reset button on the back of the SCUF 4PS near the L2 shoulder button. Step 3: Use a small, unfolded paper clip or something similar to push the button (the button is inside a tiny hole). Hold the button down for a couple of seconds and release. Step 4: After resetting the controller h2GlNYN.

how to connect ps4 controller to ps4 after reset